Anti-Rust & Corrosion Nanocoating

Anti-Rust & Corrosion, is a clear, ready-to-use coating that protects non-absorbent surfaces against rust, dirt, weathering and corrosion. Based on a patented polysilazane technology, NanoMagic Anti-Rust & Corrosion forms a long-lasting barrier layer that bonds chemically with the substrate and cures at room temperature with atmospheric humidity.

Watch in Action

LIFE:

Interior  : 20 Years Warranty
Exterior : 5 Years Warranty

Anti-Rust & Corrosion is particularly suitable for smooth, non-absorbent metal surfaces, like aluminum, zinc, stainless steel, copper and several alloys (e.g. brass and bronze). It can also be applied to one or two component paints (polyurethane or epoxy systems), polyester paints and GRP surfaces.

The surface protected with NanoMagic Anti-Rust & Corrosion can be cleaned repeatedly without reapplying the product. Applied correctly and in accordance with the TDS (Technical Data Sheet), NanoMagic Anti-Rust & Corrosion will remain effective for approximately 5 years on exterior surfaces (open environment) and 20 years on interior surfaces (depending on the neighboring environment). For maximum protection we recommend re-application every 5 years on exterior surfaces and every 20 years on interior surfaces.

Typical applications for Anti-Rust & Corrosion:

  • All metals and alloys including Aluminum, Stainless Steel.
  • Tank equipment and industrial plants.
  • Traffic signs.
  • Shipping Containers.
  • Firearm barrels.
  • Outdoor Stone Furniture.
  • Metal bollards, cabinets and outdoor furniture.
  • Oil & Gas piping and equipment
  • Long-lasting clear coating.
  • Excellent protection against graffiti.
  • Exceptional corrosion protection.
  • Produces “Easy-to-Clean” surfaces.
  • Excellent adhesion to most substrates.
  • High UV and chemical resistance.
  • Economical.
  • Easy to apply.
  • Cures at room temperature.
  • Fluorine-free.
  • Temperature resistant from -50°C to over 950°C.

Surfaces coated with NanoMagic Anti-Rust + Corrosion do not need any special cleaning regime. After coating, the surface should be self-cleaning with rain or mechanical water spray. If cleaning is necessary, we recommend using a low pH soap and water for clean-up. If the surface is attacked with graffiti, chewing gum, or poster, we recommend the use of Graffiti Remover.

Enhance Assets applying Nanotechnology

Join our newsletter for regular updates